ARCCAPTAIN 55A Plasma Cutter Non-Touch Pilot ARC Plasma Cutting Machine + Large View 3.94" x 3.66" True Color Auto Darkening Welding Helmet with Light

ARCCAPTAIN 55A Plasma Cutter Non-Touch Pilot ARC Plasma Cutting Machine + Large View 3.94" x 3.66" True Color Auto Darkening Welding Helmet with Light

• 【Non-Touch Pilot Arc Function】The plasma cutter features a high frequency non-touch arc starting mode. It allows for cutting steel surfaces with dirt, rust or coatings. The torch head does not need to touch the metal plate, reducing energy consumption, minimizing electrode burning, and extending service life.NOTE: Do not switch voltages until the screen turns off and the fan stops.
• 【Powerful & Portable】Utilizing advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc, dual voltage 110/220V, with a 60% duty cycle. The maximum cutting thickness of ARCCAPTAIN 55A plasma cutter can reach up to 3/4" @55A 220V 60PSI, while ideal clean cut at 1/2" @55A 220V 55PSI. Moreover, the plasma cutting machine only weighs 19.8LB & compact, we also provide a shoulder strap, make it easy to carry from one place to another.
• 【LED Screen Display】Newly upgraded LED interface, it centrally display parameters such as voltage, and current, makes it easier to adjust and view data without removing your helmet. The 2T/4T automatic cutting function releases your finger, making it extremely user-friendly for beginners and provide better cutting experience.
• 【Easy to Set Up】 There is an air pressure sensor inside the machine, allowing users to adjust the air pressure using the regulator. The air filter is mounted at the rear of the machine, enabling quick connection, saving installation time, and improving efficiency. The recommended air compressor pressure value is within the range of 57.5PSI, 5.3CFM. PLEASE NOTE: The Torch is AG60 Plasma Torch. NOTE: Requires compressed air (compressor sold separately).
• 【One Step to Cut】 We have pre-set default parameters such as air pressure at 60 PSI and post-flow time at 5 seconds. Users only need to choose the voltage (110V/220V) and adjust the current knob to start cutting. The 2T/4T automatic cutting function releases your finger, making it extremely user-friendly for beginners and provide better welding experience. Please note: Current display at 110V is 20-35A, under 220V is 20-55A.