EVERSECU UPS Power Supply for Door Access Entry System, AC 110-240V to DC 12V 5A Worldwide Voltage with Battery Link for Acess Control Electronic Magnetic Lock (Battery Not Included)

Eversecu 12V 5A Access Control Power Supply (CP12-5A-EG) - 60W High-Efficiency Switching Power with Battery ChargingModel: CP12-5A-EG | Reliable Power Solution for Access Control Systems, Electric Locks & Security Peripherals✅ 60W High Power Output: 12VDC nominal (adjustable 12-15VDC), 5A rated current (max 7.5A) to support heavy-duty access control devices✅ Intelligent Battery Charging: 0.15A constant current (CC) + 13.8V constant voltage (CV) floating charge, with anti-reverse connection/short circuit protection✅ 4-Layer Comprehensive Protection: Overvoltage (18V), short circuit, overcurrent (7.7A), and overtemperature (120-150℃) protection with auto-recovery✅ Energy-Efficient & Compliant: 89.0% average efficiency, ≤0.5W standby power, RoHS & IEC/EN/UL62368/GB4943 safety certifications✅ Global Voltage Compatibility: 90-264VAC input (47-63Hz) works with power grids worldwideKey Application Scenarios🏢 Commercial Buildings: Power access control panels, electric strikes, and RFID readers for offices, malls, and industrial facilities🏡 Residential Communities: Support for gate access systems, intercoms, and smart door locks in apartments and villas🏥 Public Spaces: Reliable power for security checkpoints in hospitals, schools, and government buildings🏪 Retail Stores: Power electronic locks (normally open/closed) and access management systems for shops and supermarkets📦 Warehouses & Logistics: Supply power to loading dock access controls and inventory management security devicesBattery Charging & Backup Features🔋 Smart Charging Mode: Automatically switches from constant current (0.15A, ≤13.8V) to constant voltage floating charge (13.8V) to prevent overcharging🔋 Battery Safety: Anti-reverse connection and short circuit protection for worry-free battery maintenance🔋 Backup Continuity: Seamlessly switches to battery power when AC is cut off (yellow/green LEDs indicate backup mode), ensuring access control never stopsKey Technical Specifications🔌 Input SpecificationsInput Voltage: 90-264VAC (Nominal: 115VAC/230VAC) | Input Frequency: 47-63Hz (Nominal: 50/60Hz)Max Input Current: 1.5A (minimum input voltage, full load) | Standby Power: ≤0.5WInrush Current: ≤30A (rated voltage, cold start @25℃)⚡ Output SpecificationsOutput Voltage: 12-15VDC (adjustable) | Ripple & Noise: ≤2% of output voltage (mVp-p @25℃)Output Current: 5A nominal, 7.5A maximum | Overcurrent Protection (OCP): 7.7AEfficiency: ≥89.0% (rated input, full/max load) | Voltage Overshoot: ≤10% of rated voltageDynamic Load Response: Stable output for load changes from 10% to 90% (0.1Amps/us, 50Hz-10kHz)🛡️ Protection & SafetyOvervoltage Protection (OVP): 18V (hiccup mode, auto-recovery after fault removal)Short Circuit Protection: Triggers at output impedance <0.1Ω (no component damage)Overtemperature Protection: 120-150℃ (auto-recovers when cooled)Insulation Resistance: ≥50MΩ (Primary to Secondary, 500Vdc)Insulation Strength: 3.0KVdc (Primary to Secondary, 1min) | 1.5KVdc (Primary to Ground, 1min)Leakage Current: ≤0.25mA (230Vac/50Hz)🌡️ Operating ConditionsOperating Temperature: -20℃ ~ 50℃ | 4°F ~ 122°FStorage Temperature: -20℃ ~ 85℃ | 4°F ~ 185°FHumidity: 25%-90% RH (Operating, non-condensing) / 0%-95% RH (Storage, non-condensing)Altitude: 2000 meters (Operating & Storage)MTBF: ≥10,000 Hours (@25℃, full load, rated voltage)Easy Installation & Usage Tips🔌 Indoor Installation: Mount in dry, well-ventilated areas without direct sunlight (avoid moisture)🔌 Wiring Precautions: Connect all wires (especially battery +/-) correctly before AC input; never operate with wet hands🔌 Lock Protection: Set the time delay button to 0s before connecting electronic locks to prevent coil burnout🔌 LED Status Guide: RED+GREEN (AC power on) | YELLOW+GREEN (battery backup mode); check connections/fuse if LEDs fail to lightReliability & Durability✅ Heavy-Duty Performance: 60W power output supports multiple access control devices simultaneously, ideal for high-traffic areas✅ Long-Term Stability: High efficiency reduces heat generation, paired with 100% hi-pot testing (60s) for enhanced durability✅ Wide Compatibility: Works seamlessly with access control panels, electric locks, intercom systems, and security peripherals in diverse scenarios

• The EVERSECU UPS Power Supply is designed for door access entry systems, offering a universal voltage input ranging from AC 110V to 240V, which is then converted to a DC 12V, 5A output suitable for powering access control electronic magnetic locks. It features a battery link for uninterrupted power supply, ensuring the system remains functional even during power outages. Please note that the battery is not included with the power supply unit.
• The EVERSECU UPS Power Supply is designed for compatibility with a range of access control components, including E/M locks, access controllers, exit push buttons, and RFID readers. This ensures seamless integration with various security systems, providing a stable and reliable power solution for different access control devices.
• Capable of configuring both Normally Closed (NC) and Normally Open (NO) outputs, this feature enables control over a wide array of electric lock systems.
• This product is ideal for the installation in building intercom systems and managing access control across various entry points. It is designed to be compatible with a broad range of electric locks. Additionally, it offers support for an external backpack battery with a 12V, 7AH capacity (battery not included).